Dimatix Materials Printer Dmp 2800 Manual

State University relied on a FUJIFILM Dimatix DMP-2800 Materials Printer to quantify the optimal proportions and deposition conditions of promising new metal oxides by precision-printing controlled arrays of finely-graded compounds onto transparent conductive substrates. The Dimatix inkjet printer is ideal for laboratory, process development, materials evaluation for ink jet printing on surfaces. The DMP-2831 allows the deposition of fluidic materials on an 8x11 inch or A4 substrate, utilizing a disposable piezo inkjet cartridge.

The Dimatix inkjet printer is ideal for laboratory, process development, materials evaluation for ink jet printing on surfaces. The DMP-2831 allows the deposition of fluidic materials on an 8x11 inch or A4 substrate, utilizing a disposable piezo inkjet cartridge. This printer can create and define patterns over an area of about 200 x 300 mm and handle substrates up to 25 mm thick with an adjustable Z height. The temperature of the vacuum platen, which secures the substrate in place, can be adjusted up to 60°C. Patterns can be created using the editor program or imported.

Additionally, a waveform editor and a drop-watch camera system allows manipulation of the electronic pulses to the piezo jetting device for optimization of the drop characteristics as it is ejected from the nozzle. This system enables easy printing of structures and samples for process verification and prototype creation. The Dimatix MEMS-based cartridge-style printhead that allows users to fill their own fluids and print immediately with the DMP.

To minimize waste of expensive fluids, each cartridge reservoir has a capacity of 1.5 ml. Cartridges can easily be replaced to facilitate printing of a series of fluids. Each single-use cartridge has 16 nozzles linearly spaced at 254 microns with typical drop sizes of 1 and 10 picoliters.

Contents • • • • • • • • • Announcements Updated Consumables Price from Dimatix LNF offers in the LNF store a 'Dimatix Cartridge kit'. This kit contains one cartridge, a cleaning pad, a syringe and a filter. These are the basic components needed to use the printer.

DMP2831 Training at the Masdar Institute cleanroom. The DMP-2831 allows the deposition of fluidic materials on an 8x11 inch or A4 substrate, utilizing a disposable piezo inkjet cartridge. This printer can create and define patterns over an area of about 200 x 300 mm and handle substrates up to 25 mm thick with an adjustable Z height. The temperature of the vacuum platen, which secures the substrate in place, can be adjusted up to 60°C. The DMP-2831 offers a variety of patterns using a pattern editor program. Additionally, a waveform editor and a drop-watch camera system allows manipulation of the electronic pulses to the piezo jetting device for optimization of the drop characteristics as it is ejected from the nozzle. This system enables easy printing of structures and samples for process verification and prototype creation.